DGUV Information 203-030 - Principle design rules for the use of transfer cars (...

Online-Shop für Schriften

Jetzt bei uns im Shop bestellen

Jetzt bestellen
Appendix 2, Source of supply
Appendix 2
Principle design rules for the use of transfer cars (in the corrugated board industry) (bisher: BGI 854e)


Titel: Principle design rules for the use of transfer cars (in the corrugated board industry) (bisher: BGI 854e)
Normgeber: Bund
Amtliche Abkürzung: DGUV Information 203-030
Gliederungs-Nr.: [keine Angabe]
Normtyp: Satzung

Appendix 2 – Source of supply

Following please find the pertinent rules and regulations to be observed in particular.


Source of supply:

book trade or http://eur-lex.europa.eu/de/index.htm

2006/42/EGEC-machine directive

Laws and regulations

Source of supply:

book trade or www.juris.de

ArbSchGHealth and Safety Act
ArbStättVWorkplaces ordinance
BetrSichVOrdinance on industrial safety and health
GPSGEquipment and Product Safety Act

Regulations and directives/media "Principles of prevention"

DGUV regulation A1Accident-prevention regulation (UVV) "Principles of prevention"
ASR A1.3Technical rules for working places: "Security and Health protection marking"
225Safe work in the corrugated board production
230.4Safety assessment: corrugated board production


Source of supply:

Beuth Verlag GmbH, Burggrafenstraße 6, 10787 Berlin, Germany www.beuth.de

DIN EN 619Continuous handling equipment and systems - safety and EMC requirements for equipment for mechanical handling of unit loads
DIN EN 1010-1Safety of machinery/safety requirements for the design and construction of printing and paper converting machines, part 1: Common requirements
DIN EN ISO 13857Safety of machinery/safety distances to prevent hazard zones being reached by upper and lower limbs
DIN EN 349Safety of machinery/minimum gaps to avoid crushing of parts of the human body
DIN EN 418
(replaced by DIN EN ISO 13850)
Safety of machinery/emergency stop, principles of design
DIN EN ISO 13849-1Safety of machinery/safety-related parts of control systems, part 1: general principles for design
DIN EN ISO 14121-1Safety of machinery/risk assessment, part 1: principles
DIN EN 1525Safety of industrial trucks/driverless trucks and their systems
DIN EN 60204-1Safety of machinery/electrical equipment of machines, part 1: general requirements
DIN EN 60825-1Safety of laser products, part 1: Equipment classification and requirements
DIN EN 61496-2Safety of machinery/electro-sensitive protective equipment, part 2: Particular requirements for equipment using active opto-electronic protective devices
DIN IEC 61496-3Electro-sensitive protective equipment, part 3: Particular requirements for active opto-electronic protective devices responsive to diffuse reflection